air bag and remote start

Home / the12volt's Install Bay / Car Security and Convenience / air bag and remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

x1le

Copper - Posts: 171

Joined: August 01, 2009

Location: Massachusetts, United States

Posted: February 02, 2010 at 9:41 PM / IP Logged

I would re-check your harness for the WHITE/ blue wire. If it is electrical taped up, cut the tape all the way down to the plug. A lot of times people will cut and stagger the wires they aren't using. Others will go as far as de-pinning the harness of unused wires. Hopefully this isn't the case in your vehicle.

92ss wagon

Member - Posts: 16

Joined: July 11, 2007

Location: United States

Posted: February 03, 2010 at 12:55 PM / IP Logged

I've not only checked but rechecked.(lol)

I have all of the tape off and can see every wire! No blue & white anywhere. like I said the wiring diagram on the DEI site varies from what mine actually is.

Can anyone help?? I know it's gottaa be something simple but dont wanna touch wires and chance ruining it.

Thanks

92ss wagon

Member - Posts: 16

Joined: July 11, 2007

Location: United States

Posted: February 03, 2010 at 1:21 PM / IP Logged

Well I just spend 1 hour on phone with DEI.(horribly rude people) They said the model I have is an ealry unit and doesnt have that input air bag and remote start - Page 2 -- posted image.

Anyone have an idea?? Or know of what I can buy to get me going?

monty_77

Copper - Posts: 491

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 15, 2009

Location: North Dakota, United States

Posted: February 03, 2010 at 3:58 PM / IP Logged

sure you could open the remote and do some soldering in there to make it work and leave the remote under the dash

but on once in a while you will have to chance the batteries

92ss wagon

Member - Posts: 16

Joined: July 11, 2007

Location: United States

Posted: February 03, 2010 at 4:23 PM / IP Logged

monty_77 wrote:

sure you could open the remote and do some soldering in there to make it work and leave the remote under the dash

but on once in a while you will have to chance the batteries

not sure I follow you

monty_77

Copper - Posts: 491

Joined: January 15, 2009

Location: North Dakota, United States

Posted: February 03, 2010 at 4:51 PM / IP Logged

you will have to solder wires directly to the circuit board of the remote to complete the circuits and send a command from the remote

will have to add relays

92ss wagon

Member - Posts: 16

Joined: July 11, 2007

Location: United States

Posted: February 03, 2010 at 8:26 PM / IP Logged

thanks for the ideas, but I just found a newer version of the 551R that I needed on the internet so I bought it. Cost me $50.00 BNIB so I dont think thats bad.

Do I just got negative from the AVS to the negative on the new 551R than? Thanks again for the help I appreciate it.

monty_77

Copper - Posts: 491

Joined: January 15, 2009

Location: North Dakota, United States

Posted: February 03, 2010 at 8:27 PM / IP Logged

thats all you should need

92ss wagon

Member - Posts: 16

Joined: July 11, 2007

Location: United States

Posted: February 08, 2010 at 1:30 PM / IP Logged

Well I received the new 551R in the mail today. it is definately a newer model so it has the 8 pin plug that provides the blue/white wire I needed air bag and remote start - Page 2 -- posted image.

So my questions are:

Do I hook the blue/white wire to the AVS brain negative output correct?This will start it correct?
Do I run a wire from the AVS negative output to the dark green for the lock?
Do I run a wire from the AVS negative output to the blue for the unlock?

I know they are basic question but I'd like to be sure so I dont hurt anything.Thanks again I appreciate it

92ss wagon

Member - Posts: 16

Joined: July 11, 2007

Location: United States

Posted: February 10, 2010 at 11:45 AM / IP Logged

air bag and remote start - Page 2 -- posted image.

anyone???

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.