95 integra clutch bypass

Home / the12volt's Install Bay / Car Security and Convenience / 95 integra clutch bypass (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

mlathrop

Member - Posts: 7

Joined: January 04, 2009

Location: Connecticut, United States

Posted: February 05, 2010 at 4:56 PM / IP Logged

Im a newbie to the standard world of remote starters , done my fair share of auto's over the years but not sure of what to do to bypass the clutch on my 95 integra. Anyhelp would be greatly welcomed.....IM using an AST1270M

Thanks

MIke

monty_77

Copper - Posts: 491

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 15, 2009

Location: North Dakota, United States

Posted: February 06, 2010 at 1:52 PM / IP Logged

blue/black at the clutch switch

you must send a negative to it at the time of starting

mlathrop

Member - Posts: 7

Joined: January 04, 2009

Location: Connecticut, United States

Posted: February 06, 2010 at 3:17 PM / IP Logged

So would the Orange GWR be enough ? or do i need to use a relay 86 to 12volts 87 to to ground 85 to GWR and 30 to blue black on clutch switch ?

Thanks ?

monty_77

Copper - Posts: 491

Joined: January 15, 2009

Location: North Dakota, United States

Posted: February 06, 2010 at 4:13 PM / IP Logged

I would add a relay so you know it will be good

And it should keep the brain safe sense most are 500 ma or less

mlathrop

Member - Posts: 7

Joined: January 04, 2009

Location: Connecticut, United States

Posted: February 06, 2010 at 4:23 PM / IP Logged

thanks monty_77....the way i listed wiring the relay sounds right to you ?

monty_77

Copper - Posts: 491

Joined: January 15, 2009

Location: North Dakota, United States

Posted: February 06, 2010 at 9:00 PM / IP Logged

looks go to me

zerepdivad

Silver - Posts: 605

Joined: July 03, 2006

Location: Wisconsin, United States

Posted: February 06, 2010 at 9:11 PM / IP Logged

Multimeter would have been much quicker to answer than anyone on this forum haha.

A DMM is a beautiful thing.

MECP Advanced Installer Certified.

monty_77

Copper - Posts: 491

Joined: January 15, 2009

Location: North Dakota, United States

Posted: February 06, 2010 at 9:22 PM / IP Logged

some of us have to work and are not at the computer 100% of the time

have to pay the bills and this is free!

zerepdivad

Silver - Posts: 605

Joined: July 03, 2006

Location: Wisconsin, United States

Posted: February 06, 2010 at 9:33 PM / IP Logged

Exactly. While he was waiting he could have figured it out by himself.

now he's likely to never post again. I imagine the average post count for people on this forum is like less than 20 if you factor in all the people who come on here just to get spoonfed information then never post again.

A DMM is a beautiful thing.

MECP Advanced Installer Certified.

monty_77

Copper - Posts: 491

Joined: January 15, 2009

Location: North Dakota, United States

Posted: February 06, 2010 at 10:24 PM / IP Logged

if figure i get some help now and then on this forum.

the least i can do is give some when i can.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.