2007 saturn ion

Home / the12volt's Install Bay / Car Security and Convenience / 2007 saturn ion (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ipv_zach

Member - Posts: 8

Joined: August 30, 2007

Location: United States

Posted: February 08, 2010 at 10:18 PM / IP Logged

I installed an alarm on a 2007 Saturn Ion today and randomly the trunk release switch and door locks dont work. Ive done about 50 of these cars and never had that problem. I checked all the fuses, all good. I had diode on lock cathode facing the alarm, and 1k ohm on unlock, also hooked up a trunk pop. WHY DONT THEY WORK!!!!

alarmwizard

Back to Top

ipv_zach

Member - Posts: 8

Joined: August 30, 2007

Location: United States

Posted: February 08, 2010 at 10:21 PM / IP Logged

also i could still pop the trunk with my remote but not at the switch. And the door locks, im getting the - pulse through my tester but no lock or unlock.

alarmwizard

Back to Top

ceasar326

Copper - Posts: 239

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 02, 2006

Location: Minnesota, United States

Posted: February 09, 2010 at 12:25 AM / IP Logged

Did you use relays. Also do the door locks work with the car master switch. Ive done a few of those with and with out bypass. Most bypass control the door locks and trunk release. But when it comes to just alarm i would use relays to be safe and resistors.

Power lock White (-)

Power unlock same as power lock wire (-) 1.5k ohms

BCM Black 56 pin plug, pin 33

Trunk release BLACK/ white (+) switch or BCM black 56 pin plug, pin 1

Back to Top

ipv_zach

Member - Posts: 8

Joined: August 30, 2007

Location: United States

Posted: February 09, 2010 at 10:35 PM / IP Logged

I used relay only for trunk pop. No the locks dont work at the switch, and either does the trunk release. Im thinking there is a factory ground that has come loose or has a bad connection. and the unlock is at 1k not 1.5k. and you dont need relays for the locks. and i did grab the white wire and the BLACK/ white at the BCM.

alarmwizard

Back to Top

the05bluredline

Member - Posts: 39

Joined: November 08, 2009

Location: Washington, United States

Posted: March 04, 2010 at 11:54 PM / IP Logged

I used a 1.5k resistor and relays for mine and they work. Maybe try it see usually the alarm ground is only sufficient enough to trip a relay.

Back to Top

Search for other posts by the05bluredline

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2007 saturn ion

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.