what are the gate trigger switches?

Actually you beat me as well tommy! My excuse is time zones, Mr I's is that he's still celebrating the Super Bowl. Addendum to your wiring list. You can cheat on the door contacts by going straight to the neg. switching side of the inst. panel warning light. "GATES" must be Chinglish, wonder if this unit well even work?

Well I got it off of ebay. The vender is based out of FL but can tell it came straight from China. It's a Giordon A-F06. Kinda funny as the box reads "Korea Technology" on the front.

Finally had a chance to hook up the power locks now I'm ready to connect the main unit. I've looked over the diagram and I'm trying to figure out two things. 1) Diagram shows a turning light 1 & 2 to connect to two wires on the main unit. Couldn't I just connect both wires together and connect to the parking light wire? 2)There is a part at the bottom of diagram that show two connections from main unit that is suppose to connected to the engine disconnecting circuit. It reads one connection to the primary wire of the HP winding cut off and the other wire to ON joint +12v. Does any one know what they are referring to?

1 Yes otherwise the "turning lights" are the direction indicators (amber) as used EVERYWHERE ELSE IN THE WORLD BAR NORTH AMERICA! 2 It refers to starter cut, didn't realise it was a Giordon, throw it away it won't work!