the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

crimeguard 750i6 on 2010 tacoma


Post ReplyPost New Topic
< Prev Topic Next Topic >
cjastacio 
Member - Posts: 19
Member spacespace
Joined: January 30, 2006
Location: United States
Posted: March 07, 2010 at 12:56 AM / IP Logged  
Hi all,
I'm working on my install and will pick up tomorrow. I have all the wires sorted right now except the domelight supervision wires. I'm really confused about these two wires on the Crimeguard alarm. According to the manual, I can connect the GREEN/ violet wire(supervision output) to the door trigger connection that I use. This seems easy enough, just connect the door trigger and GREEN/ violet wire to the same wire. But where I get confused is on the connection of the BLACK/ red(supervision input) wire. Is this supposed to be connect to the same wire as above or somewhere else?
Another question that would totally nullify the above question is do I even need to connect these wires at all? The factory keyless entry already turns on the domelight on unlock. That being said, all I really need to worry about are my lock/unlock connections as these functions control the domelight as well. Am I right here?
cjastacio 
Member - Posts: 19
Member spacespace
Joined: January 30, 2006
Location: United States
Posted: March 07, 2010 at 11:11 PM / IP Logged  
Ok, so I asked crutchfield and they confirmed that I don't need to use the domelight supervision because of the factory keyless already working with domelight supervision. So once I have the keyless for the crimeguard is connected domelight supervision will work. They also told me that IF I still wanted to use the domelight supervision capabilities is the crimeguard, I would connect the GREEN/ violet wire to door trigger and the BLACK/ red to ground.
On another note, I have been trying to find the lock and unlock cables in my truck. I have the wire list but it only says to look for them in the white plug in the driver's kick panel. Well, there are a number of white plugs in the driver's kick panel! Does anyone know where I can find documentation which would tell me EXACTLY where to find the lock/unlock wires?
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: March 08, 2010 at 6:27 PM / IP Logged  
Follow the wires coming in from the rubber door boot, they travel down to 2 plugs that are not mounted in the kickpanel but are simply loose. The wires on each side of these plugs are covered in black plastic. You'll find them there...
Mike M2
Tech Manager
CS Dealer Services

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer