the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 kia soul remote start alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
visionsss 
Member - Posts: 19
Member spacespace
Joined: October 09, 2004
Location: Washington, United States
Posted: March 13, 2010 at 5:25 PM / IP Logged  

I need the wiring for a 2010 Kia Soul. Doing a remote start alarm. Also if there is a bypass module suggestion I would appreciate it. I would like to use the Compustar Blade if it will work.

Thanks

Fred Kincaid
Visions Sound & Security
GPS Northwest
kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: March 13, 2010 at 8:54 PM / IP Logged  

KIA SOUL   2010 -                      Info from Bulldog Security

 
 PART                                      COLOR                                     LOCATION
 12 VOLT CONSTANT           WHITE (+), 40 AMP                   @ IGNITION SWITCH, (BLACK, 6-PIN PLUG), PIN 5 
 STARTER                               BLUE (+)                                    @ IGNITION SWITCH, (BLACK, 6-PIN PLUG), PIN 1 
 STARTER 2                           N/A  
 IGNITION 1                           PINK (+)                                       @ IGNITION SWITCH, (BLACK, 6-PIN PLUG), PIN 6
 IGNITION 2                           N/A    
 IGNITION 3                           N/A    
 ACCESSORY /HEATER BLOWER 1  WHITE (+), NOTE #2           @ IGNITION SWITCH, (BLACK, 6-PIN PLUG), PIN 3 
 ACCESSORY /HEATER BLOWER 2  YELLOW (+)                          @ IGNITION SWITCH, (BLACK, 6-PIN PLUG), PIN 4 
 KEYSENSE                          N/A    
 PARKING LIGHTS ( - )       PINK (-)                                                    @ HEADLIGHT SWITCH, (WHITE, 13-PIN PLUG), PIN 1 
 PARKING LIGHTS ( + )     GREEN/ BLACK(+)(Left) and 
                                               YELLOW/BLACK(+)(Right), use both!!  @ DASH FUSE BOX, (REAR BLUE, 22-PIN PLUG(I), PINS 17 and 16 
 POWER LOCK                   BROWN (-), TYPE B                              in DRIVERS KICK PANEL, (WHITE, 26-PIN PLUG), PIN 10 
 POWER UNLOCK               GREEN (-), TYPE B, NOTE #3          in DRIVERS KICK PANEL, (WHITE, 26-PIN PLUG), PIN 18 
 DOOR TRIGGER                GREEN (-)                                              in PASSENGER KICK PNEL, (WHITE, 26-PIN PLUG), PIN 16 
 DOMELIGHT SUPERVISION      BLUE (-)                                       in DRIVERS KICK PANEL, (WHITE, 26-PIN PLUG), PIN 14 
 TRUNK RELEASE              PINK (-), NOTE #4                                in DRIVERS KICK PANEL, (WHITE, 26-PIN PLUG), PIN 1 
 SLIDING POWER DOOR         N/A    
 HORN                                     GRAY (-)                                              Above DRIVERS KICK PANEL, (BLUE, 39-PIN PLUG), PIN 29 
 TACH                                      GREEN, (AC)                                      Above DRIVERS KICK PANEL, (BLUE, 39-PIN PLUG), PIN 17 
 WAIT TO START LIGHT        N/A    
 BRAKE                                   RED / ORANGE (+)                              Above DRIVERS KICK PANEL, (WHITE, 14-PIN PLUG), PIN 7 
 FACTORY ALARM DISARM       GRAY (-) and YELLOW (-) NOTE #5     in DRIVERS KICK PANEL, (WHITE, 26-PIN PLUG), PINS 13 and 23 
 ANTI-THEFT  KIA'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1   @ IGNITION SWITCH TUMBLER 

 EXTRA INFORMATION

 NOTE #1: KIA'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, Part # 791 Bypass Module
 for REMOTE STARTING
 NOTE #2: this wire may need to be RELAY ISOLATED to prevent STARTER GRIND upon KEY take over.
 NOTE #3: to UNLOCK just the DRIVERS DOOR, use the BROWN (-), at the DASH FUSE BOX,
 (REAR WHITE, 20-PIN PLUG(D), PIN 1
 NOTE #4: TEST this wire while Opening the TAILGATE with the Handle on the REAR of the Vehicle.
 NOTE #5: to DISARM, use the GRAY (-) and the YELLOW (-) use both wires, and DIODE ISOLATE will
 Require a Double Pulse. TEST these wires while turning the KEY in the Drivers Door. 
Soldering is fun!
kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: March 13, 2010 at 9:08 PM / IP Logged  

As for bypass modules, only Fortin lists their PATS-KIA-1 bypass for the Soul and that would require a dealer scan tool to program.  Looks like it's a key in the box...

Soldering is fun!
kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: March 13, 2010 at 9:11 PM / IP Logged  
iDatalink Tech Support is very good, so you might contact them to see is they have a solution in the works for their Blade cartridge...
Soldering is fun!
fieldtrip 
Member - Posts: 3
Member spacespace
Joined: April 27, 2010
Location: Quebec, Canada
Posted: April 27, 2010 at 7:59 PM / IP Logged  
I work in a Dealer in Quebec and here they are only Pats Kia-1 availible for Kia. They are one other possibility it's to put a key in a box... but not much apreciated...
lucasoil4u 
Copper - Posts: 317
Copper spacespace
Joined: May 11, 2009
Location: Minnesota, United States
Posted: May 15, 2011 at 1:25 PM / IP Logged  
if you put a key in the box you dont need a dealer scan tool but you do loose a key. you only need the dealer scan tool if you use the tbx kia key.
syl20rochon 
Copper - Posts: 298
Copper spacespace
Joined: October 16, 2009
Location: Ontario, Canada
Posted: May 15, 2011 at 6:58 PM / IP Logged  
iDatalink doesn't have a solution if your vehicle is not a PTS. Fortin Patskia or DEI RFLkia2 with the pkdock work great and is less expensive. Key in a coffin is the easiest unless a spare key is not available.
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.
lucasoil4u 
Copper - Posts: 317
Copper spacespace
Joined: May 11, 2009
Location: Minnesota, United States
Posted: May 16, 2011 at 12:00 PM / IP Logged  
How do you realy isolate the ignition wires . All help is greatly apreciated . I id one of these with no bypass . Thanks
How do you get a viper alar to double pulse on disarm?
lucasoil4u 
Copper - Posts: 317
Copper spacespace
Joined: May 11, 2009
Location: Minnesota, United States
Posted: May 16, 2011 at 12:04 PM / IP Logged  
What part number diodes do I get from radio shack?
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: May 16, 2011 at 12:50 PM / IP Logged  
1N4004 for the diodes.
Viper alarm double pulse lock and unlock from the programming.
What do you mean by isolating the ignition?
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer