cm6000 into a ’96 maxima

Home / the12volt's Install Bay / Car Security and Convenience / cm6000 into a ’96 maxima (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 29, 2010 at 6:44 AM / IP Logged

you can use any of the outputs that you dont need that will offer a ground while its about to rs.

using status output, or ign will do.

enice is right about the trunk, but i just like to take extra precaution so i dont burnout the output.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

darkmega

Member - Posts: 10

Joined: March 25, 2010

Location: Alberta, Canada

Posted: March 29, 2010 at 11:16 AM / IP Logged

Another problem- My doors will lock but will not unlock. i've hooked it up according to how i should and it will not unlock. i've tried to set it to option1-2 for the double pulse, i can hear the relay in the box now go on and off twice but no unlock happens.

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 29, 2010 at 3:10 PM / IP Logged

tes the unlock output form the unit. is it working?

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

darkmega

Member - Posts: 10

Joined: March 25, 2010

Location: Alberta, Canada

Posted: March 29, 2010 at 4:08 PM / IP Logged

yes, its 5volts just like the "lock" wire which is working

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 29, 2010 at 4:51 PM / IP Logged

you must hae got the wrong wire on the car. dod you test it before connecting?

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

darkmega

Member - Posts: 10

Joined: March 25, 2010

Location: Alberta, Canada

Posted: March 29, 2010 at 5:20 PM / IP Logged

i figured it out, had to setup the double pulse....

So where do you recommend going through the firewall at for the siren? last piece to the puzzle and then im done.

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 29, 2010 at 6:43 PM / IP Logged

look under the dash around the firewall area. look for a factory loom heading out into the engine bay. you should be able to find out and pull your wires through.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

darkmega

Member - Posts: 10

Joined: March 25, 2010

Location: Alberta, Canada

Posted: March 29, 2010 at 7:59 PM / IP Logged

YAY i have a complete install!!! thx for the help!!

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 30, 2010 at 9:53 AM / IP Logged

no problem, good to know you got it done.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

cm6000 into a ’96 maxima

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.