1987 trans am, viper 5002

Home / the12volt's Install Bay / Car Security and Convenience / 1987 trans am, viper 5002 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

jetmech_jt8

Member - Posts: 30

Joined: January 25, 2009

Location: Ontario, Canada

Posted: May 04, 2010 at 5:56 PM / IP Logged

No I do not. The only indication that a door is open in this car is the Dome light staying on. Theres one plunger switch in each A' pillar

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: May 04, 2010 at 7:50 PM / IP Logged

An instant trigger has to be present you may have to locate them individually and diode them together!

commit your way to jehovah and he will act in your behalf. psalms 37:5

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: May 04, 2010 at 9:07 PM / IP Logged

Get to the pinswitch, cut the wire, put a diode inline and wire your door rigger between the pin and the diode. You'll have to do that on the other door too.

jetmech_jt8

Member - Posts: 30

Joined: January 25, 2009

Location: Ontario, Canada

Posted: May 06, 2010 at 7:05 PM / IP Logged

Door trigger? Are you meaning an additional switch that I have to install?

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: May 06, 2010 at 9:33 PM / IP Logged

No, the plunger thats already on the door.

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: May 07, 2010 at 8:37 PM / IP Logged

Actually you shouldn't have to interrupt the wire fron the plunger, the diode will only be needed to isolate the seperate triggers!

commit your way to jehovah and he will act in your behalf. psalms 37:5

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: May 07, 2010 at 11:26 PM / IP Logged

Where do you have the door trigger for the 5002 hooked up? At the underdashlight? You'll need to get that off there.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1987 trans am, viper 5002

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.