on/off swtich and remote wire
Topic Closed)
Members
Search
Register
Login
Posted: May 18, 2010 at 1:04 PM / IP Logged
Heres a diagram of my setup
1 - My remote wire has alot of connections together, what's the best way to clean it up and make it safer? I was thinking to leave the amps together on the remote wire and the rest tap into the accessory wire of my car.
2 - I really want to have a swtich up front so I can turn on/off my inverter. Is thier a switch that can use to tap into the 8ga power line of the inverter? thanks
Posted: May 18, 2010 at 1:52 PM / IP Logged
Posted: May 18, 2010 at 1:56 PM / IP Logged
For #2, I'd use a simple toggle switch and a high current relay such as a PAC 80.
the12volt • Support the12volt.com
the12volt • Support the12volt.comSorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
