remote replacement

Home / the12volt's Install Bay / Car Security and Convenience / remote replacement (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

shadow14us

Member - Posts: 2

Joined: June 03, 2010

Location: New Mexico, United States

Posted: June 03, 2010 at 8:19 PM / IP Logged

Recently purchased two new remotes for my K9 Classic, but I am having difficulty in getting them installed. Tried to follow the instruction thatcame with the remotes, but nothing happens. Press the necessary buttons, but zero, nada, zilch. Any suggestions?

The Shadow Knows

Back to Top

topinstaller200

Copper - Posts: 164

Joined: June 02, 2010

Location: Florida, United States

Posted: June 07, 2010 at 11:58 PM / IP Logged

gotta get the alarm into programming mode. check to make sure your valet switch is working/ plugged in

Back to Top

Search for other posts by topinstaller200

shadow14us

Member - Posts: 2

Joined: June 03, 2010

Location: New Mexico, United States

Posted: June 08, 2010 at 1:53 PM / IP Logged

OK, hate to sound dumb, but where is the "Valet" switch located? This alarm system was already installed when I purchased the vehicle from the original owner, and I don't have any paperwork on this unit.

The Shadow Knows

Back to Top

r.loring

Member - Posts: 3

Joined: June 02, 2010

Location: Georgia, United States

Posted: June 11, 2010 at 6:43 PM / IP Logged

should find what youre looking for here:

k9 classic manual

I will not Fear. Fear is the mind killer.

Back to Top

r.loring

Member - Posts: 3

Joined: June 02, 2010

Location: Georgia, United States

Posted: June 11, 2010 at 6:51 PM / IP Logged

had to do research on this recently.

the valet switch is usually on just below the left side of the steering wheel or further underneath the right side. it will either be a toggle switch or a tiny spring button.

I will not Fear. Fear is the mind killer.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote replacement

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.