the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

interfacing w/ indash screen 07 qx56


Post ReplyPost New Topic
< Prev Topic Next Topic >
rallysport 
Copper - Posts: 172
Copper spacespace
Joined: April 10, 2004
Location: United States
Posted: June 08, 2010 at 9:22 PM / IP Logged  
I installed a flo tv system into an Infinity QX56. I got it working with the factory dvd screen for the rear seats just fine. Im trying to use a RGB2+ from nav-tv to get the flo tv on the factory indash navi/back up screen.
The nav-tv help department has not been able to help me, they have no wiring info but told me remove all the panels to gain access to the screen's wiring, turn the key to the run position and probe each wire with a test light. Then when i probe the red, green and blue wires the screen will display a color. Does this sound right? I probed all 24 wires and never got anything on the screen. They also said there should be a sheilded wire, which there wasn't. Any help? Havent done this before and its the vehicle belongs to my boss interfacing w/ indash screen 07 qx56 -- posted image.
Also after giving up for the day and putting it all back together the airbag light is on, everything is plugged in and no wires were cut, suggestions?
topinstaller200 
Copper - Posts: 164
Copper spacespace
Joined: June 02, 2010
Location: Florida, United States
Posted: June 09, 2010 at 2:11 AM / IP Logged  

ok, you got the wrong part. the following will show you the right part # and step by step instruction

http://www.navvideo.com/downloads/Install_NV_RGB3.pdf

AIR BAG. The airbag light came on because you disconnected the passenger airbag on/off warning light when you removed the center dash piece. Then you energized the ignition while still disconnected. That popped a code. For future reference, its ok to disconnect but dont turn on ignition without reconnecting first

To fix : you can simply read/reset codes with a scan tool or try disconnecting negative terminal of car battery for 5 minutes you might get lucky.

The first time this happened to me I was lucky because I was at the infiniti dealership  and had one of the mechanics reset for me. He said I saved about $85 if I had to pay for it

rallysport 
Copper - Posts: 172
Copper spacespace
Joined: April 10, 2004
Location: United States
Posted: June 09, 2010 at 2:39 AM / IP Logged  
Thanks Don, Ive been out of installing for a few years and just got a new job doing it again, I had forgot about not turning the switch when things are unplugged. I can borrow an obd2 scanner so I should be able to get the light off. So the navvideo product just comes with a harness which plugs into the screen? It looks like a much better design.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, November 27, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer