problem with soundstream unit

Home / the12volt's Install Bay / Car Audio / problem with soundstream unit (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

daniel gt1

Copper - Posts: 55

Joined: October 30, 2009

Location: Trinidad and Tobago

Posted: June 26, 2010 at 12:45 PM / IP Logged

yea guys, i have a Soundstream VIR 7355NRBT dvd unit...now my problem is, i'm not geting no signal from the front on the unit to the front on the Preamp (s.s 7xo). and not able to adjust my frequency volumes....what could be the cause of this problem ?

roadshop570

Copper - Posts: 128

This member has made a donation to the12volt.com. Click here for more info.

Joined: August 25, 2009

Location: South Carolina, United States

Posted: June 27, 2010 at 4:01 PM / IP Logged

Im assuming your using the cable that comes with the unit? Is it the 3.5 or mini-usb? And what device are you using? Phone,ipod,etc...

Chadillac

daniel gt1

Copper - Posts: 55

Joined: October 30, 2009

Location: Trinidad and Tobago

Posted: June 27, 2010 at 6:16 PM / IP Logged

roadshop570 wrote:

Im assuming your using the cable that comes with the unit? Is it the 3.5 or mini-usb? And what device are you using? Phone,ipod,etc...

nope..it doesnt have nothing to do with the axu. etc...everything was connected accordingly..I'm just not geting no signal on my music..I assuming the deck was damaged and needs to be repaired.

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 27, 2010 at 7:36 PM / IP Logged

Have you tried to remove the pre-amp from the equation for troubleshooting purposes? Out of the deck directly into an amp.

daniel gt1

Copper - Posts: 55

Joined: October 30, 2009

Location: Trinidad and Tobago

Posted: June 27, 2010 at 7:40 PM / IP Logged

Yes i did all that...and still no signal...

any other expert advice...i need to solve this problem asap....

daniel gt1

Copper - Posts: 55

Joined: October 30, 2009

Location: Trinidad and Tobago

Posted: June 27, 2010 at 7:48 PM / IP Logged

i checked for any faults on the rca's,power cables,fuses and other connections...there were no kinks or faults,

i am an idiot

Platinum - Posts: 13,667

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 27, 2010 at 7:52 PM / IP Logged

Visual inspections of power ground and remote connections will tell you nothing. Have you tried using a volt meter to make sure ther is adequate voltage getting to the amp(s)?

Is the amp new to the system? Are you sure it works?

daniel gt1

Copper - Posts: 55

Joined: October 30, 2009

Location: Trinidad and Tobago

Posted: June 27, 2010 at 7:55 PM / IP Logged

All my equipment were bought brand spanking new from there respective dealers...and yes, i do hav a voltmeter...the battery is aStinger SPV 35, and the voltage reads 13.6 - 14.2. There wasn't no signs of voltage drop

i am an idiot

Platinum - Posts: 13,667

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 27, 2010 at 8:38 PM / IP Logged

Do you have an IPod or some kind of MP3 player you can use for injecting signal directly into the amp?

daniel gt1

Copper - Posts: 55

Joined: October 30, 2009

Location: Trinidad and Tobago

Posted: June 27, 2010 at 8:40 PM / IP Logged

i'll try that and get back to u.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

problem with soundstream unit

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.