bypassing factory alarm on 2000 dodge

Home / the12volt's Install Bay / Car Security and Convenience / bypassing factory alarm on 2000 dodge (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

muzzy73

Member - Posts: 3

Joined: June 30, 2010

Location: Texas, United States

Posted: June 30, 2010 at 4:59 PM / IP Logged

I have a 2000 dodge dakota. I installed an aftermarket alarm several months ago and have had no problems the other day my factory alarm armed and i cant get it to disarm. Any ideas on how to bypass the factory alarm

DW Hefner

Back to Top

muzzy73

Member - Posts: 3

Joined: June 30, 2010

Location: Texas, United States

Posted: June 30, 2010 at 5:02 PM / IP Logged

or is there a way to reset it i didnt recieve the remote for the keyless entry when i bought the truck but the alarm supposed to disarm when the key is put in and turned to unlock the truck

DW Hefner

Back to Top

brent w

Member - Posts: 26

Joined: June 24, 2010

Location: Montana, United States

Posted: July 01, 2010 at 2:27 PM / IP Logged

Ok what i would do is test the Factory Alarm Disarm while using the key to unlock the door.

FACTORY ALARM DISARM

BLACK/ ORANGE (-)

IN EITHER KICK PANEL

Find the wire in the kick panel and take a DMM set to 12v DC and get the red lead on a 12v constant(use a fuse or the 12v constant wire at the ignition harness) then probe the BLACK/ Orange wire while unlocking the door. If the DMM doesnt say 12v when you are unlocking, i would say the switch has gone bad.

One of the more senior members might be able to add to this.

Back to Top

muzzy73

Member - Posts: 3

Joined: June 30, 2010

Location: Texas, United States

Posted: July 01, 2010 at 8:39 PM / IP Logged

Thank you. I will try that

DW Hefner

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bypassing factory alarm on 2000 dodge

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.