86 mercedes 300e doorlocks

Home / the12volt's Install Bay / Car Security and Convenience / 86 mercedes 300e doorlocks (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

installerman23

Copper - Posts: 53

Joined: July 08, 2006

Location: United States

Posted: July 03, 2010 at 3:33 AM / IP Logged

I have a question on the vacuum doorlocks.The diagram on this site says it'll only work with a 2 sec pulse,will programing an alarm to 2 pulses for lock/unlock work or would you have to use some kind of timing device??Also,I wanted to make sure that the main vacuum pump controls all the locks including the trunk and fuel door.Thanks

installing, one day at a time..

Back to Top

Search for other posts by installerman23

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 03, 2010 at 8:21 AM / IP Logged

Actually it's 3.5 secs., all the better alarms can be programmed for this, a double pulse won't work and yes driver or passenger blue or green or at the pump, above colours + yellow control wires will work locks/unlocks doors trunk and fuel flap.

Window lift on that generation is a nightmare.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

86 mercedes 300e doorlocks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.