2000 nissan xterra, python 580 locks

Home / the12volt's Install Bay / Car Security and Convenience / 2000 nissan xterra, python 580 locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

kreg357

Platinum - Posts: 7,827

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: August 13, 2010 at 8:06 PM / IP Logged

The Pink/Black is not used. The others go to a suitable +12v constant source.

Soldering is fun!

chjade84

Member - Posts: 10

Joined: April 07, 2009

Posted: August 13, 2010 at 11:47 PM / IP Logged

It's alive!

Thank you for the help. I really appreciate it. Otherwise I'd still be stuck on getting the door locks to work. lol

You guys are awesome!

chjade84

Member - Posts: 10

Joined: April 07, 2009

Posted: August 14, 2010 at 3:39 PM / IP Logged

Last question, I promise. :)

It's all working fine and the car is back together. There's one possible issue though, which I discovered after it was all back together. When it's remote started and I put the key in and turn it, the starter clicks real quickly (like 0.1 sec) going past the 'accessory' position. Is that normal?

I figure it's not the worst thing in the world, but for the time being I'm either going to turn off the truck with the remote on my way out to it or else I'll hit the brake to turn it off when I get in and then start it up again with the key. It doesn't click when using the key when the engine is off, fortunately.

So I guess I'm wondering if something is wired wrong or if that's just the way it is - at least on the Xterra.

Thanks again. I never could have done it without you guys!

smokeman1

Platinum - Posts: 1,589

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: August 21, 2010 at 7:38 AM / IP Logged

Just wondering. Is the Python the same as the Viper 5301?

Can't find a install manual or a owners manual for this.

Thanks

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 nissan xterra, python 580 locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.