need 2010 tacoma wiring for remote start

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / need 2010 tacoma wiring for remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ashleytingle

Member - Posts: 3

Joined: August 21, 2010

Location: South Carolina, United States

Posted: August 24, 2010 at 3:39 PM / IP Logged

I posted this request earlier but I think I may have placed it in the wrong forum. I also need the factory immobilizer location

kreg357

Platinum - Posts: 7,789

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: August 24, 2010 at 6:39 PM / IP Logged

According to Bulldog Security, the 2009 and 2010 are the same. http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp

I don't believe they are using 80 bit keys on the Tacoma yet. ( 80 bit key has a "G" stamped on the blade. ) A DEI PKALL should work. Here is a link to the PKALL info, check the Tacoma Install guide for connector location, etc. http://www.xpresskit.com/product.aspx?productid=196

Soldering is fun!

ashleytingle

Member - Posts: 3

Joined: August 21, 2010

Location: South Carolina, United States

Posted: August 25, 2010 at 7:41 AM / IP Logged

Thanks so much!!! I was a master installer back in the early 90's. My how cars have changed!!! I used to could install a DEI rermote start blindfolded. Not so much anymore... Really glad I found this site

kreg357

Platinum - Posts: 7,789

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: August 25, 2010 at 9:22 AM / IP Logged

Glad to assist. Anything else just ask, there are alot of knowledgeable people on this site.

Good luck!

Soldering is fun!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

need 2010 tacoma wiring for remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.