verifying nissan keysense info.

Home / the12volt's Install Bay / Car Security and Convenience / verifying nissan keysense info. (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

octomobiki

Member - Posts: 7

Joined: October 03, 2010

Posted: October 23, 2010 at 3:48 PM / IP Logged

ok got it all up and running. to clarify -

no modifications/connections needed for keysense.

When my installer originally said "no bypass needed" he meant that there was no valet key necessary. he actually DID (of course) bypass the key system with a bypass unit. I had ordered the XK07 unit from amazon for around 40 dollars and hooked it up. Stupid easy - the 4 wire direct connection from bypass unit to alarm - ignition wire, CAN high and CAN low. starts right up each and every time. thanks guys for the insight you have provided me. I have on happier fiancee.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

verifying nissan keysense info.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.