2008 honda accord, viper 5301, canmax

Home / the12volt's Install Bay / Car Security and Convenience / 2008 honda accord, viper 5301, canmax (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

judgetredd77

Member - Posts: 10

Joined: October 13, 2010

Posted: October 14, 2010 at 3:29 PM / IP Logged

Hey guys, I'm going to be installing my gear pretty soon... does anyone have experience doing this?

I browed through hundreds of posts, but never found a true guide to wiring a Viper 5301 remote starter with a CANMAX 400. I pieced the install information together and came up with this.

Does this wiring look good to you?

CANMAX 400DEI --> ACCORD

20-pin connector --> 7-pin connector (Behind key cylinder)

PIN 3 (tan) - CAN Low --> PIN 3 (blue) - Imm. Conn. (white)

PIN 4 (tan/black) - CAN High --> PIN 4 (pink) - Imm. Conn. (white)

PIN 14 (violet/white) - IMM. Data --> PIN 6 (lt. green) - Imm. Conn. (white)

CANMAX 400DEI --> VIPER 5301

4-pin D2D harness --> VIPER 5301 D2D connector

VIPER 5301 --> ACCORD

Primary (H1) 12-pin connector

H1/2 (red) - 12V input --> H3/5 (red) - H3 connector

H1/5 (black) - Ground --> Ground

Heavy gauge (H3) 8-pin connector

H3/1 (pink) - Ignition 1 (out) --> Ignition 1 (blue) - Ignition harness

H3/3 (orange) - Access. output --> Access. 1 (orange) - Ignition harness

H3/4 (violet) - Starter output --> Starter 1 (yellow) - Ignition harness

H3/5 (red) - Ignition 1 (in) --> 12V 1 (white) - Ignition harness

H3/8 (RED / black) - Acc. start. in --> H3/5 (red) - H3 connector

Remote start input 5-pin connector

PIN 1 (BLACK/ white) - Neutral sfty --> Ground

PIN 3 (brown) - Brake shutdown --> Brake (lt. green) - Brake pedal switch

PIN 5 (blue/white) - Rear defog --> Rear defrost (black)Fuse box green

Any help appreciated!

Judge

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: October 15, 2010 at 10:47 PM / IP Logged

check your pm. but also nothing that a little searching wont find for you.

https://www.the12volt.com/installbay/downloads.asp?srch=all&term=honda+accord

download the two documents. one is a wiring guide, the other is a full DIY guide that i wrote.

good luck.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

judgetredd77

Member - Posts: 10

Joined: October 13, 2010

Posted: November 04, 2010 at 2:30 PM / IP Logged

OK, everything is installed (or so I think).

I can lock / unlock the doors, but I cannot get into programming mode through the valet swtich. What should I be checking? Here is what I do:

1. Turn ignition On, then Off

2. Press and hold the valet switch... nothing happens

I'll check the door pin, the pink ignition wire on my Multimeter, the Neutral Safety. Anything else I should look at?

Any help appreciated!

Judge

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2008 honda accord, viper 5301, canmax

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.