the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2007 gmc canyon passlock light


Post ReplyPost New Topic
< Prev Topic Next Topic >
Falcon 1 
Copper - Posts: 130
Copper spacespace
Joined: November 15, 2003
Location: Canada
Posted: October 17, 2010 at 3:23 PM / IP Logged  

 Just installed autopage remote start/alarm model #c3-rs730 with idat-link ads-dl. Everything is wired but the only problem is the security light stays on after remote start. and truck is running. 

If I start the truck just with key everything is fine no security light but while running if I use the pit stop feature the security light comes on again but the truck stays running.

Any help would be appreciated. Thanks

Do it right the first time, only a doctor can bury his mistakes.
kreg357 
Platinum - Posts: 7,781
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: October 17, 2010 at 4:26 PM / IP Logged  

Was the ADS DL flashed with the ADS DL GM4 Ver 3.6 firmware?  Did you connect both the remote start and the ADS DL to the trucks Igniton and Accessory wires?

I think I would try a Factory Reset on the ADS DL, then set the mode and then re-program it to the truck.  I did a 2005 Colorado using an ADS DL last week ( because it had the factory alarm ) and everything went smoothly.

Soldering is fun!
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 17, 2010 at 5:03 PM / IP Logged  
Relocate the ground on the remote starter. Chances are you have high resistance compared to the battery. I've had lots of trouble like this on Chevy's and relocating the ground fixes the problem every time.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Falcon 1 
Copper - Posts: 130
Copper spacespace
Joined: November 15, 2003
Location: Canada
Posted: October 17, 2010 at 7:12 PM / IP Logged  
kreg357 wrote:

Was the ADS DL flashed with the ADS DL GM4 Ver 3.6 firmware?  Did you connect both the remote start and the ADS DL to the trucks Igniton and Accessory wires?

I think I would try a Factory Reset on the ADS DL, then set the mode and then re-program it to the truck.  I did a 2005 Colorado using an ADS DL last week ( because it had the factory alarm ) and everything went smoothly.

Yes the ADS DL was flashed and yes the ignition and accessory wires are connected. I have also done factory reset on ads-dl and even the remote start.

I just did a 2008 Canyon about 4 weeks ago with exact same system and it's working fine no issues no security light staying on. That's why I'm stumped.

Do it right the first time, only a doctor can bury his mistakes.
Falcon 1 
Copper - Posts: 130
Copper spacespace
Joined: November 15, 2003
Location: Canada
Posted: October 17, 2010 at 7:15 PM / IP Logged  

Velocity Motors wrote:
Relocate the ground on the remote starter. Chances are you have high resistance compared to the battery. I've had lots of trouble like this on Chevy's and relocating the ground fixes the problem every time.

Thanks for the tip I will give this a try also, when I get the truck back in the next couple of days.

Do it right the first time, only a doctor can bury his mistakes.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer