2010 ford taurus factory alarm disarm

Home / the12volt's Install Bay / Car Security and Convenience / 2010 ford taurus factory alarm disarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tooler

Member - Posts: 20

Joined: February 04, 2004

Posted: October 19, 2010 at 5:35 AM / IP Logged

I am having trouble finding the wire to disarm the factory alarm. Info I have says it is GREEN/ violet. Does this wire go to ground when key is turned in lock? If anyone can assist me in finding wire it would be appreciated.

Back to Top

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: October 19, 2010 at 7:28 AM / IP Logged

hi,

what style key does the taurus have...metal blade or fob... meaning a regular ignition key cylinder? the metal key doesn't have a disarm signal in the door cylinder switch. you need to pulse the ignition and the transponder bypass at the same time to disarm the alarm.

mark

Back to Top

tooler

Member - Posts: 20

Joined: February 04, 2004

Posted: October 19, 2010 at 8:06 AM / IP Logged

It has the metal key regular ignition

Back to Top

chrisnepa

Member - Posts: 14

Joined: October 07, 2010

Location: Pennsylvania, United States

Posted: October 19, 2010 at 9:03 AM / IP Logged

What are you trying to accomplish? Are you installing a remote starter? If so, then the above answer is right.

Been installing for 15 years

Back to Top

tooler

Member - Posts: 20

Joined: February 04, 2004

Posted: October 19, 2010 at 9:13 AM / IP Logged

Yes remote start.

Back to Top

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: October 20, 2010 at 11:18 AM / IP Logged

Have you tested to make sure your car has a factory alarm?

Back to Top

tooler

Member - Posts: 20

Joined: February 04, 2004

Posted: October 20, 2010 at 11:20 AM / IP Logged

Yes it does

Back to Top

jim hunter

Silver - Posts: 351

Joined: March 23, 2006

Location: United States

Posted: October 20, 2010 at 10:18 PM / IP Logged

only way to disarm the ford alarm is either with factory remote or with ign and transponder at same time. if doing start only no extra steps are needed but if your doing keyless and or alarm also, youll have to wire in a relay to pulse the ign wire and the transponder bypass at the time of unlock to disarm alarm, or just make certain you never lock doors with dr door open therefore alarm wouldnt arm, it only arms with factory fob or if locking doors while dr door is open

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2010 ford taurus factory alarm disarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.