winisd parameter

Home / the12volt's Install Bay / Car Audio / winisd parameter (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

richmane

Member - Posts: 6

Joined: September 07, 2010

Location: Washington, United States

Posted: November 02, 2010 at 1:43 PM / IP Logged

Here are my driver parameters:

Z: 4

Revc: 4

Levc: 1.62 mH

Sd: 0.0491 sq. m

BL: 15.8 T-m

Vas: 63.93 L

Mms: 129.1 g

Fs: 32 Hz

Qms: 12.11

Qes: 0.44

Qts: 0.42

Peak: 800W

Xmax: 8 mm

Displacement: 0.144 cf

Mount Depth: 135 mm

Voice Coil Diameter: 65 mm

I am unsure if I input the parameters on WinISD correctly, can someone plug these in so and let me know what you got to see if I got it right? I am a newb, sorry for all the neediness!

I have zeroes for Re and Le, not sure what to place there.

Thanks!

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: November 02, 2010 at 1:55 PM / IP Logged

According to what you posted, Re = 4 and Le = 1.62. What problems are you having in WinISD?

Support the12volt.com

Back to Top

richmane

Member - Posts: 6

Joined: September 07, 2010

Location: Washington, United States

Posted: November 02, 2010 at 2:56 PM / IP Logged

none anymore thanks! actually, i input those parameters as a guess, and it fixed my curve, i'll let you know if i run in to any more problems, but i did post a port suggestion topic, if you wanna check it out, maybe some input, i'm trying to achieve rumbling bass, not booming, i built one box tuned to 60 hz, but i read that tuning it to start at 45 hz and end at 50-60 hz is typical. i don't know what slot port size should be, or if i do external.

thank you1

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

winisd parameter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.