honda accord 2000 starter kill wiring

I really need help fast. I'm trying to install a Clifford Matrix 1x security system. I connected everything but I am still having issues with the Starter Kill. I'm not so sure if i'm suppose to cut the starter wires (blk and white) or am I suppose to cut the ignition wire (black and yellow). I need to cut one of the two wires so I can hook up the Black chassis ground wire and the key switch wire of the Matrix 1x. I also have the ignition wire of the Matrix 1x and I'm not sure where I'm suppose to hook that one up. Please help me out! Much thanks appreciated

The only wire you should cut is the Starter wire.  It is BLACK/ White.

So should I connect the switch ignition (yellow wire, also connects to the key switch) from the Matrix 1x to the ignition (blk/white)in the Honda? Thanks for replying!

Ignition in the car is BLACK / YELLOW.

Oops typo, So I should connect it to the blk / YELLOW?

If the yellow wire of the alarm is labeled ignition, then yes, that is the wire it should be connected.