the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

06 ram remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
installerman23 
Copper - Posts: 53
Copper spacespace
Joined: July 08, 2006
Location: United States
Posted: January 23, 2011 at 10:59 PM / IP Logged  
Yeah it seems like an immobilizer issue,it'll start with the key in.I tried a different chall unit and it did the same thing.I tried putting power through the ignition 1 and it still didn't work.The locking/unlocking issue is weird,I think I'll try calling dei tomorrow and see what they have to say.Unlocking when you cancel the remote start is really annoying.
installing, one day at a time..
installerman23 
Copper - Posts: 53
Copper spacespace
Joined: July 08, 2006
Location: United States
Posted: January 26, 2011 at 2:02 AM / IP Logged  
Got it all working but it unlocks during wait to start and locks when it starts.it only unlocks the driver door during remote start as well.
installing, one day at a time..
installerman23 
Copper - Posts: 53
Copper spacespace
Joined: July 08, 2006
Location: United States
Posted: January 26, 2011 at 2:10 AM / IP Logged  
Tech support said it unlocks during wait to start to disarm the immobilizer then rearms after the truck starts.I just don't like the fact it unlocks the doors,does yours do this opelap?? Does anyone know a different bypass that doesn't require a key for operation but wouldn't have these issues with the doorlocks during remote start?
installing, one day at a time..
opelap 
Member - Posts: 40
Member spacespace
Joined: November 08, 2010
Location: Montana, United States
Posted: January 26, 2011 at 10:22 AM / IP Logged  

Not that I have noticed. I always get parking light flash when the truck unlocks and it does not happen on a remote start.

Do you have the factory security system? If so it may need to do it to keep the alarm from going off. I do not have it so it is not a problem for me.

Makes no sense to my why an unlock signal would have to be sent for the Sentry key system.  The CHALL should have learned your code from the key you used to program it and supply it to the SKIM directly. That is one of the reasons for the T-Harness.

installerman23 
Copper - Posts: 53
Copper spacespace
Joined: July 08, 2006
Location: United States
Posted: January 26, 2011 at 2:33 PM / IP Logged  
It has the keyless entry but no alarm.the problem was that I would have to wait 2 minutes in between remote starts or the truck would start then stop.I programmed as if it had the factory alarm and now it works no problem but unlocks the doors during wait to start.dei tech support says it's normal,I just don't like it.
installing, one day at a time..
opelap 
Member - Posts: 40
Member spacespace
Joined: November 08, 2010
Location: Montana, United States
Posted: January 26, 2011 at 9:28 PM / IP Logged  
I'm going to have pay closer attention. I would swear mine does not do that and I have it set to wait 30 seconds.
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, January 26, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer