dball, 5301 remote start, 2011 sonata

if your using D2D you will only need to hook up:

2x heavy guage Power wires (red)- which will connect to the I/P junction box Pin 13 (RED) on the plug to the bottom left

the heavy guage (+) ignition wire from the remote start to the Dball modules pin 9 (pink) on the 10-pin plug.

and then tap into that ignition wire with a diode isolated wire (diode band facing the wire you just tapped(ignition wire)

connect that wire to pin 11 (Pink) which is in the plug to the right on the I/P junction box