the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 5901, ’06 Dodge Ram


Post ReplyPost New Topic
< Prev Topic Next Topic >
sullivan91 
Copper - Posts: 86
Copper spacespace
Joined: December 25, 2010
Location: Texas, Eritrea
Posted: January 30, 2011 at 10:10 PM / IP Logged  
so NO resistor is needed for the remote start?
opelap 
Member - Posts: 40
Member spacespace
Joined: November 08, 2010
Location: Montana, United States
Posted: January 31, 2011 at 1:19 PM / IP Logged  
No. The CHALL takes care of the Accessory and Starter signals on the MUX line which are done with resistance.
sullivan91 
Copper - Posts: 86
Copper spacespace
Joined: December 25, 2010
Location: Texas, Eritrea
Posted: February 26, 2011 at 11:39 PM / IP Logged  
Looking for some help on hooking up the remote start portion of my system. The alarm is all nicely hooked up using chall. Remote start is the only task left unfinished.
Here is how it is supposed to be installed:
https://img15.imageshack.us/img15/6780/challt.png
Here is the wiring diagram for my truck:
http://www.bulldogsecurity.com/diagrams/printpage.asp?ModelID=19742&MakeID=16
I have a relay, and some of them hooked up. But I just don't understand diagrams that well. I like step by step instructions that are detailed or photos.
If someone could please assist me by telling me which colored wires from where go to the relay and which wire connections I need to make by describing the color of the wires.
Thanks
Page of 9

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, November 26, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer