fortin evo chr and python ps5000

I am going to be installing a Python Smart Start 5000, which uses a python 5103 module, on a 2010 Challenger using the evo-chr. Ive been looking at the diagrams and I cant figure out where to hook the starter and ignition wires to. The evo-chr instructions say the starter and ignition should both be positive but the python instructions only show the ignition as positive and the starter wires negative. Anyone have any advice?

the starter wire from the python is actually positive. you must be looking at the 2nd starter output (-) 250ma.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert