problem with xk09 with niss.2 firmware

Home / the12volt's Install Bay / Car Security and Convenience / problem with xk09 with niss.2 firmware (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sean11901

Copper - Posts: 118

Joined: March 05, 2010

Posted: January 02, 2011 at 3:05 PM / IP Logged

I installed an avital 4113 withan xk09 in an 05 nissan titan. I programmed the xk09 and remote started the vehicle and I worked. Then I tried again and that time it didn't work it juast cranked. So then I tried reseting the module and reprograming it and then still nothing its like the module isn't even doing anything. So I did the true test and put the key in the ignition in the off position and remote started the truck and it started right up.

Could this be a defective xk09?

Thanks

Back to Top

tonanzith

Gold - Posts: 593

This member consistently provides reliable information

Joined: July 18, 2008

Location: Washington, United States

Posted: January 03, 2011 at 7:17 PM / IP Logged

You should use the dlpk. I have found them to be FAR more reliable than the XK modules.

Gary Sather

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

problem with xk09 with niss.2 firmware

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.