the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

resistor door locks, 99 alero


Post ReplyPost New Topic
< Prev Topic Next Topic >
luvs2div 
Member - Posts: 21
Member spacespace
Joined: March 23, 2003
Location: United States
Posted: January 07, 2011 at 11:13 PM / IP Logged  
99 Alero takes a straight negative to lock.  Takes a negative through a 1500 ohm resistor to unlock.  Mars 33 Alarm/Remote start combo.  Of course I tried to sneak the resistor directly in line but no dice.  Since it has a neg. output only.  So I used 1 single relay just on the unlock side.  Lock works fine.  I hit unlock and the relay clicks but no unlock.  stuck a test light on the the trigger side of the relay and the relay clicked, locks unlocked...  Relay is getting the signal from the brain and clicking the relay...  won't unlock.  I trigger the same wire with a test light/probe,  works every time...   ???  Please enlighten me???
zerepdivad 
Silver - Posts: 605
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: July 03, 2006
Location: Wisconsin, United States
Posted: January 08, 2011 at 1:27 AM / IP Logged  
how is your relay wired?
should be something like this
87- ground
86-12volts
85- negative out from unit
30- negative lock wire with resistor inline
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
luvs2div 
Member - Posts: 21
Member spacespace
Joined: March 23, 2003
Location: United States
Posted: January 08, 2011 at 8:52 AM / IP Logged  
Yes,  thats the way its wired.  It works fine if i trigger it any other way than the RS neg. output.  Even with that, the relay clicks.  Darndest thing.  Installed thousands of remote starts and this baffles me a bit...
zerepdivad 
Silver - Posts: 605
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: July 03, 2006
Location: Wisconsin, United States
Posted: January 08, 2011 at 12:12 PM / IP Logged  
the negative out from the remote start might be too weak to trigger the relay then. get maybe a smaller relay? dei 451m works great
A DMM is a beautiful thing.
MECP Advanced Installer Certified.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 13, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer