2010 toyota camry, adslaca, viper vss5000

This should make more sense... I made a couple of changes! H1        RED / White Aux trunk release TO ADSALCA RED / white trunk release input Red 12v constant input TO 12v Con Black IGN Harness Brown Siren TO Siren           Empty Black      Chassis Ground     TO     Chassis Ground           Violet     Door input      TO     n/u           Blue     Trunk instant trigger input     TO     ADSALCA yellow/red trunk status output Green     Door input      TO     ADSALCA     yellow/black     door status output BLACK/ White     Domelight output     TO     n/u           WHITE/ Blue     Remote Start activation input     TO     n/u           White     Parking light output 30     TO     CamSE     black     parking lights (fuse box) Orange     Ground when armed output     TO     n/u                      H3 BLACK/ White     Neutral safety input     TO     Chassis ground           Violet/White     tach input     TO     ADSALCA     PURPLE / white     Tach (AC) output Brown     Brake shut down input     TO     ADSALCA     orange     Brake output Gray     Hood pin switch NO/NC input     TO     ADSALCA     yellow     hood status output Blue/White     2nd remote start status / Defogger (prgm) output     TO     RELAYS to make a latched positive and connected to the large (+) white cable that runs down the driver's side molding.            Door Unlock/Lock           Blue     Unlock (-) Lock (+)     TO     ADSALCA     blue/black     unlock input Green     Unlock (+) Lock (-)     TO     ADSALCA     GREEN/ black     lock input            H2           L GREEN/ black     OEM disarm output     TO     n/u           L GREEN / WHITE     OEM arm output     TO     n/u           WHITE/ violet     Aux 1 output     TO     n/u           Violet/black     Aux 2 output     TO     n/u           WHITE/ black     Aux 3 output     TO     n/u           Light blue     2nd unlock output     TO     ADSALCA     blue/black     unlock input Gray/Black     wait to start input     TO     n/u           H4 Brown     horn honk output     TO     CamSE     white     Fuse box ORANGE / Black    (-) 200mA Channel 6 Output    TO    n/u Door Lock Green    (-) lock (+) unlock    TO     ADSALCA    GREEN/ Black    lock input Blue    (+) unlock (-) lock    TO    ADLALCA    Blue/Black    unlock input            Relay Satellite Pink     IGN 1 output      TO     CamSE IGN 1 / ADSALCA     Yellow / Pink     IGN Harness / IGN sense input RED / White     12v constant fused 30a input TO     CamSE 12v Con     Black     IGN Harness Orange     Accessory output     TO     CamSE Acc 1     White     IGN Harness Violet     Starter output (car side)     TO     CamSE IGN Harness    Start 1     Blue     IGN Harness   &    CamSE IGN Harness    Gray Start 2 Green     Starter output (key side)     TO     n/u Red    12v constant fused 30a input (for IGN1 relay)     TO     CamSE 12v Con     Black     IGN Harness Pink/White     (default IGN2, prgm)     TO     CamSE IGN 2     Pink     IGN Harness Relay Satellite out           Blue      RS status output     TO     ADSALCA     blue/white     ground while running Orange     RS Accessory output     TO     n/u           Violet     RS starter output     TO     (STDP relay)    GamSE IGN Harness     Gray   Starter 2 Pink     RS IGN1 output     TO     n/u                      ADS LA CA           blue/white     ground while running     TO     Viper RS out     Blue      RS status output black     Chassis ground     TO     Chassis ground           red      12v constant 30amp fused     TO     CamSE 12v con     Black     IGN Harness GREEN/ black     lock input     TO     Viper Door lock/unlock     Green     Unlock (+) Lock (-) blue/black     unlock input     TO     Viper Door lock/unlock     Blue     Unlock (-) Lock (+) RED / white     trunk release input     TO     Viper H1     RED / White     Aux trunk release green      e-brake output     TO     n/u        PURPLE / white     Tach (AC) output     TO     Viper RS in     Violet/White     tach input yellow/black     door status output     TO     Viper H1     Green     Door input yellow/red     trunk status output     TO     Viper H1     Blue     Trunk instant trigger input yellow     hood status output     TO     Viper RS in     Gray     Hood pin switch NO/NC input BROWN / red     CANh     TO     CamSE     6/black     OBDII BROWN / yellow     CANl     TO     CamSE     14/white     OBDII ORANGE / black     Chassis ground (OEM hood pin installed)     TO     Chassis ground           orange     Brake output     TO     Viper RS in     Brown     Brake shut down input Pink     IGN input (+)     TO     CamSE IGN 1     Yellow     IGN 1 Harness GREEN/ red     code     TO     CamSE     4/brown     Key IGN Imm gray/red     txct     TO     CamSE     5/red     Key IGN Imm