This should make more sense... I made a couple of changes!
H1
RED / White Aux trunk release TO ADSALCA RED / white trunk release input
Red 12v constant input TO 12v Con Black IGN Harness
Brown Siren TO Siren
Empty
Black Chassis Ground TO Chassis Ground
Violet Door input TO n/u
Blue Trunk instant trigger input TO ADSALCA yellow/red trunk status output
Green Door input TO ADSALCA yellow/black door status output
BLACK/ White Domelight output TO n/u
WHITE/ Blue Remote Start activation input TO n/u
White Parking light output 30 TO CamSE black parking lights (fuse box)
Orange Ground when armed output TO n/u
H3
BLACK/ White Neutral safety input TO Chassis ground
Violet/White tach input TO ADSALCA PURPLE / white Tach (AC) output
Brown Brake shut down input TO ADSALCA orange Brake output
Gray Hood pin switch NO/NC input TO ADSALCA yellow hood status output
Blue/White 2nd remote start status / Defogger (prgm) output TO RELAYS to make a latched positive and connected to the large (+) white cable that runs down the driver's side molding.
Door Unlock/Lock
Blue Unlock (-) Lock (+) TO ADSALCA blue/black unlock input
Green Unlock (+) Lock (-) TO ADSALCA GREEN/ black lock input
H2
L GREEN/ black OEM disarm output TO n/u
L GREEN / WHITE OEM arm output TO n/u
WHITE/ violet Aux 1 output TO n/u
Violet/black Aux 2 output TO n/u
WHITE/ black Aux 3 output TO n/u
Light blue 2nd unlock output TO ADSALCA blue/black unlock input
Gray/Black wait to start input TO n/u
H4
Brown horn honk output TO CamSE white Fuse box
ORANGE / Black (-) 200mA Channel 6 Output TO n/u
Door Lock
Green (-) lock (+) unlock TO ADSALCA GREEN/ Black lock input
Blue (+) unlock (-) lock TO ADLALCA Blue/Black unlock input
Relay Satellite
Pink IGN 1 output TO CamSE IGN 1 / ADSALCA Yellow / Pink IGN Harness / IGN sense input
RED / White 12v constant fused 30a input TO CamSE 12v Con Black IGN Harness
Orange Accessory output TO CamSE Acc 1 White IGN Harness
Violet Starter output (car side) TO CamSE IGN Harness Start 1 Blue IGN Harness & CamSE IGN Harness Gray Start 2
Green Starter output (key side) TO n/u
Red 12v constant fused 30a input (for IGN1 relay) TO CamSE 12v Con Black IGN Harness
Pink/White (default IGN2, prgm) TO CamSE IGN 2 Pink IGN Harness
Relay Satellite out
Blue RS status output TO ADSALCA blue/white ground while running
Orange RS Accessory output TO n/u
Violet RS starter output TO (STDP relay) GamSE IGN Harness Gray Starter 2
Pink RS IGN1 output TO n/u
ADS LA CA
blue/white ground while running TO Viper RS out Blue RS status output
black Chassis ground TO Chassis ground
red 12v constant 30amp fused TO CamSE 12v con Black IGN Harness
GREEN/ black lock input TO Viper Door lock/unlock Green Unlock (+) Lock (-)
blue/black unlock input TO Viper Door lock/unlock Blue Unlock (-) Lock (+)
RED / white trunk release input TO Viper H1 RED / White Aux trunk release
green e-brake output TO n/u
PURPLE / white Tach (AC) output TO Viper RS in Violet/White tach input
yellow/black door status output TO Viper H1 Green Door input
yellow/red trunk status output TO Viper H1 Blue Trunk instant trigger input
yellow hood status output TO Viper RS in Gray Hood pin switch NO/NC input
BROWN / red CANh TO CamSE 6/black OBDII
BROWN / yellow CANl TO CamSE 14/white OBDII
ORANGE / black Chassis ground (OEM hood pin installed) TO Chassis ground
orange Brake output TO Viper RS in Brown Brake shut down input
Pink IGN input (+) TO CamSE IGN 1 Yellow IGN 1 Harness
GREEN/ red code TO CamSE 4/brown Key IGN Imm
gray/red txct TO CamSE 5/red Key IGN Imm