(-) Start Activation input

Home / the12volt's Install Bay / Car Security and Convenience / (-) Start Activation input (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

dyer

Copper - Posts: 206

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 24, 2002

Location: United States

Posted: June 11, 2002 at 1:01 PM / IP Logged

How do i know which wire is the (-) Start Activation input? How can i find it?

Dyer

Big Dog

Gold - Posts: 1,265

This member consistently provides reliable information

Joined: May 02, 2002

Location: Quebec, Canada

Posted: June 11, 2002 at 1:23 PM / IP Logged

Hey dyer,

I must have missed the beginning of the thread somewhere but what brand and model is your remote starter? An easy way to find the (-) Start Activation input is by quickly sending a negative pulse through a test light on all wires one at a time until you have a reaction.

Prepare your future. It wasn't the lack of stones that killed the stone age.

dyer

Copper - Posts: 206

Joined: May 24, 2002

Location: United States

Posted: June 11, 2002 at 2:02 PM / IP Logged

i have a crimestopper cs-2011rs. About an hour ago i went to a place where alarms are installed and i asked what this was and they told me it was just a bunch of big words that mean simply...its the ground wire. they told me to hook it up to the (-) battery terminal. Can i hook it up to a chassis gound instead?

Dyer

Big Dog

Gold - Posts: 1,265

Joined: May 02, 2002

Location: Quebec, Canada

Posted: June 11, 2002 at 2:42 PM / IP Logged

Hey dyer,

I think you misunderstood them. The ground is the black wire while the Green (-) Start Activation input is used in conjunction with an alarm system or other keyless system. For example if you connect the trunk release output wire of your alarm to this wire you will be able to remote start using your alarm remote. (-) Start Activation input -- posted image.

Prepare your future. It wasn't the lack of stones that killed the stone age.

dyer

Copper - Posts: 206

Joined: May 24, 2002

Location: United States

Posted: June 11, 2002 at 2:48 PM / IP Logged

so where exactly does the Green (-) Start Activation input wire go? My alarm remote has a button for the remote start. I want to use my trunk release for my trunk which also has its own button.

Dyer

Big Dog

Gold - Posts: 1,265

Joined: May 02, 2002

Location: Quebec, Canada

Posted: June 11, 2002 at 2:51 PM / IP Logged

Hey dyer ,

If you have the remotes that came with the cs-2011rs then you don't connect the green wire anywhere. Just tape the end and forget about it like it doesn't exist! (-) Start Activation input -- posted image.

Prepare your future. It wasn't the lack of stones that killed the stone age.

Big Dog

Gold - Posts: 1,265

Joined: May 02, 2002

Location: Quebec, Canada

Posted: June 11, 2002 at 2:54 PM / IP Logged

Hey dyer ,

This isn't a forum anymore...it just became a chat room. Our messages are crossing each other! (-) Start Activation input -- posted image.

Prepare your future. It wasn't the lack of stones that killed the stone age.

dyer

Copper - Posts: 206

Joined: May 24, 2002

Location: United States

Posted: June 11, 2002 at 3:31 PM / IP Logged

thank you. Sorry if i was a bother.

Dyer

Big Dog

Gold - Posts: 1,265

Joined: May 02, 2002

Location: Quebec, Canada

Posted: June 13, 2002 at 11:06 AM / IP Logged

Hey dyer ,

No bother at all! Let me know how your install worked out. (-) Start Activation input -- posted image.

Prepare your future. It wasn't the lack of stones that killed the stone age.

dyer

Copper - Posts: 206

Joined: May 24, 2002

Location: United States

Posted: June 13, 2002 at 3:27 PM / IP Logged

My install....... Few problems. First I only get a little bit of time a day, so i'm still in the process. When My alarm goes off it drains the battery in about a minute. Why is this? Also, my lock button works, but my unlock doesn't. Got any ideas? My trunk pin doesn't have a switch, so do i just ground the wire going to it?

Dyer

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.