2010 f250 diesel cc al 1810 edp, pkall

Home / the12volt's Install Bay / Car Security and Convenience / 2010 f250 diesel cc al 1810 edp, pkall (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

dafaic

Member - Posts: 20

Joined: January 25, 2011

Location: Texas, United States

Posted: January 30, 2011 at 2:28 PM / IP Logged

Trucks up and running. Now trying to figure out why turn signals on mirrors and front don't work and getting an emergency brake light on. Turn signals in the back do work.

2010 f250 6.4 cc

monty_77

Copper - Posts: 491

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 15, 2009

Location: North Dakota, United States

Posted: January 30, 2011 at 4:20 PM / IP Logged

do you have a wire of the alarm hooked to the parking brake wire.

that wire might be sending a negative signal to the wire

if it's not a manual you do not need one there.

as for turn signals i would check the fuses and then the flasher relays for starter not sure but some vehicles have separate ones for the front and rear

dafaic

Member - Posts: 20

Joined: January 25, 2011

Location: Texas, United States

Posted: January 30, 2011 at 5:13 PM / IP Logged

Parking brake out is a + and need it for turbo timer engagement.

2010 f250 6.4 cc

monty_77

Copper - Posts: 491

Joined: January 15, 2009

Location: North Dakota, United States

Posted: January 30, 2011 at 5:34 PM / IP Logged

my information says

parking brake

WHITE/ purple negative at parking brake switch or SJB, gray 26 pin plug (C), pin 1

if you need it to be positive you will have to use a relay to convert it.

dafaic

Member - Posts: 20

Joined: January 25, 2011

Location: Texas, United States

Posted: January 30, 2011 at 10:04 PM / IP Logged

Bulldog shows it to be positive? PURPLE / white @ brake or sjb black 52 pin #40.

2010 f250 6.4 cc

dafaic

Member - Posts: 20

Joined: January 25, 2011

Location: Texas, United States

Posted: January 31, 2011 at 2:58 PM / IP Logged

Never mind. There was 2 of us working on truck and one of us forgot to latch one of the sjb plugs down.

2010 f250 6.4 cc

dafaic

Member - Posts: 20

Joined: January 25, 2011

Location: Texas, United States

Posted: February 04, 2011 at 10:28 AM / IP Logged

So I have found another weird issue with the alarm I don't think we can fix. The turbo timer option works. Press/release brake and turn truck off it will keep running. As soon as I pull the key truck dies and security light flashes.

2010 f250 6.4 cc

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2010 f250 diesel cc al 1810 edp, pkall

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.