locks only with viper160xv in 01 tacoma?

Those colour schematics are terribly similiar to nissans of that generation.

All the Japanese manufacturers used similar colours for ignition/start and lighting (green base) up until about 03. The problem is the average Japanese car could be manufactured in the following places: Japan, China, India, Brazil, UK, France, Spain, Portugal, Czech Republic, Hungary, Russia etc. etc.

Ok so Im in the middle of trying to hook up the lock/unlock on my Tacoma. Heres what I have so far... first is from Viper system, second is wiring in truck. Red - constant 12v black - ground screw blue/green twisted - purple and the gray wire (have tried reversing them also) yellow - ignition wire, black w/ red green - door switch Now what happens is when I push lock on the remote the exterior and interior lights flash once and I hear a click but locks dont move. When I push unlock the same lights flash but twice for interior lights but locks dont move. What am I doing wrong???

Have you tested those wires to verify they are the correct trigger wires?

ok for future reference the blue and green twisted wires hook up to the yellow/red and the BLACK/ blue wires for a 01 Tacoma V6 4wd with power windows/locks

Always test before you connect.