the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2001 suzuki bandit


Post ReplyPost New Topic
< Prev Topic Next Topic >
chev104275 
Gold - Posts: 1,419
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: February 16, 2011 at 9:57 AM / IP Logged  
I changed all the turn signals to led 1157 bulbs and making the turn signal lights act as running lights. The front works fine as they were wired like that already. But the back if i connect the wire coming from the rear tail light assy for the running lights the directional will stop working and the directional indicator will be lit dim. if i connect just the running light it works or if i connect just the directional it works just not together.
Any ideas on how to fix this ?? thanks Joe
If i Can't Install it    I Don't need it   Joe
i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: February 18, 2011 at 9:09 PM / IP Logged  
Connect the taillight to the dimmer of the 2 elements.  Connect the blinker wire to the brighter of the 2 elements.
chev104275 
Gold - Posts: 1,419
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: February 19, 2011 at 5:53 AM / IP Logged  
Ha ha ha I know that.   I think I figured it out. I'm waiting for a new flasher relay to correct the fast flash. If I put a diode in the turn signal wire it stops the feedback from the parking light but without the new relay it stops flashing I'm assuming because on the lack of load on the factory flasher relay
If i Can't Install it    I Don't need it   Joe
chev104275 
Gold - Posts: 1,419
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: February 23, 2011 at 5:17 PM / IP Logged  
Allset with the new flasher relay installed it flashes correctly and with a diode inline with the turn signal wire no back feeding from the parking lights
I used a ELFR-1 from customled.com. 2 min install
If i Can't Install it    I Don't need it   Joe

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer