2010 jeep wrangler

Home / the12volt's Install Bay / Car Security and Convenience / 2010 jeep wrangler (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

carsolutions

Member - Posts: 8

Joined: March 02, 2011

Location: Alberta, Canada

Posted: March 02, 2011 at 9:48 AM / IP Logged

hi there, i need some help on this one.

we did a video deck, speaker, amps and subs on this 2010 jeep wrangler now it wont start. i seem like the clutch switch wont engage. however there is no visible switch at the pedal.

we didnt use the can iterface module to install the deck, could the can wires screw something on the bcm or somthing? we reinstall the factory deck and disconect the battery but nothing.

any sugestions? thank you.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 02, 2011 at 9:06 PM / IP Logged

The clutch activation is on the engine side of the firewall. If there's a problem with the start, check to see if the Sentry LED is flashing when trying to start. Also, is the truck trying to start or not even cranking ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

carsolutions

Member - Posts: 8

Joined: March 02, 2011

Location: Alberta, Canada

Posted: March 03, 2011 at 8:53 AM / IP Logged

thanks Jeff, i did find the switch but that wasnt the problem. the vehicle didnt crank at all. and the red led was off. not sure what happen in there i left the battery unplug all nigth hoping is gona reset something but nothing happen so i send the car to the dealership. hope i dont get a big bill of it. however doodie happens.

i let you know what they tell me. have a good day.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2010 jeep wrangler

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.