the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 Maxima starter wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
Telemotix 
Member - Posts: 3
Member spacespace
Joined: April 23, 2003
Location: United States
Posted: April 24, 2003 at 8:29 AM / IP Logged  

About to install a starter interrupt and remote door unlock. Anybody gotten into the 2004 Maxima yet? Looking for wiring colors and locations. Thanks!

draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: April 24, 2003 at 8:35 PM / IP Logged  
here is 2002
double check your wires..............
Constant 12 volts RED (2) IGNITION SWITCH HARNESS
Ignition 12 volts PINK IGNITION SWITCH HARNESS
Starter YELLOW IGNITION SWITCH HARNESS
Dome Light PURPLE (-) 4 PIN BLACK CONN. IN DR. KICK PANEL *
Trunk Pin Switch N/A
Parking Lamp BROWN (+) AT HEADLIGHT SWITCH
Power Lock L BLUE DRIVER KICK #203
Power Unlock WHITE PANEL ** #202
* PURPLE (-) Wire Also Located At Headlight Switch. WHITE (-) Wire At Courtesy Light Can Also Be Used But Will Not Trigger Alarm If Dome Lamp Override Switch Is Turned On. ** Without OEM Keyless Entry See Note #203. With OEM Keyless See Note #202. #203- See Reversal Rest At Ground Door Lock Diagram. #202- See Positive Pulse Door Lock Diagram
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Telemotix 
Member - Posts: 3
Member spacespace
Joined: April 23, 2003
Location: United States
Posted: April 25, 2003 at 12:27 PM / IP Logged  
Hey thanks. According to Wire Magic, I'll need to run a new wire to the door switch for the unlock/lock function. I'm new to this stuff but this does sound weird. Anything in the door should be duplicated in the kick panel wiring? I'll dig into this again next week and post the results. Thanks again for the info.
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: April 25, 2003 at 10:05 PM / IP Logged  
"Anything in the door should be duplicated in the kick panel wiring?"
Welcome to the world of multiplexed doorlocks and windows.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer