need 2006 f150 alarm wiring diagram

Thanks. I never wired in diodes, so this is new, but seems relatively simple. I was just unsure of relays, because the instructions show for negative and positive door locks. It makes it easier, since you are saying no relays needed!!! Unfortunately, the install is going to take me all day! I just had back surgery in August, so I have ti take it slow. Going to do this, and put on a Flowmaster exhaust this weekend (if I have enough time). Again, thanks for the info!

I got the alarm installed this evening. Everything went smoothly. Here are 2 more questions: 1 - How can I hook the horn into the alarm? There was not a wire color code or location for hooking up to the horn. 2 - There was also not a wire color code or location for the dome light wire, so that when the alarm disarms, it turns on the dome light. Thanks for the help on everything so far.

Here is info from Bulldog Security for the wire locations:

 DOMELIGHT SUPERVISION        BLACK/ LIGHT BLUE (+)               IN DRIVERS KICK PANEL, GRAY Plug, Pin 6

 This is a (+), so depending on the Alarms' output, you might need a relay to convert polarity. 

 HORN                    DARK BLUE (-)         @ STEERING COLUMN HARNESS or BCM, BLUE Plug, Pin 12

                                                                     The BCM (Body Control Module) is located on the DRIVERS                                                                      SIDE REAR CAB WALL.

Soldering is fun!