the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

trailblazer r/s no crank


Post ReplyPost New Topic
< Prev Topic Next Topic >
may03lt 
Copper - Posts: 55
Copper spacespace
Joined: March 06, 2007
Location: Delaware, United States
Posted: April 05, 2011 at 5:24 AM / IP Logged  
I didn't think about the relay running all the time!!!
I'll make the necessary adjustments tonight (weather permitting) and post results.
2003 Trailblazer LT
2007 Envoy SLT
may03lt 
Copper - Posts: 55
Copper spacespace
Joined: March 06, 2007
Location: Delaware, United States
Posted: April 05, 2011 at 9:03 PM / IP Logged  
edit: sorry im blind
2003 Trailblazer LT
2007 Envoy SLT
syl20rochon 
Copper - Posts: 298
Copper spacespace
Joined: October 16, 2009
Location: Ontario, Canada
Posted: April 05, 2011 at 9:07 PM / IP Logged  
yes and make sure in the option programming that it is set to 2nd status
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.
syl20rochon 
Copper - Posts: 298
Copper spacespace
Joined: October 16, 2009
Location: Ontario, Canada
Posted: April 05, 2011 at 9:11 PM / IP Logged  
option programming that it is set to 2nd status is factory set to status in menu 3 option 11.
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.
may03lt 
Copper - Posts: 55
Copper spacespace
Joined: March 06, 2007
Location: Delaware, United States
Posted: April 06, 2011 at 6:21 PM / IP Logged  
syl20rochon wrote:
The way you have wired your relay makes your relay work all the time, even when you're using the key..not recommended. The way I specified above will only trigger the relay in remote start operation. Your green wire from the r/s should be connected to your pink/white of your bypass and the pink of the bypass should be connected to the BLACK/ white domelight supervision output of the r/s.
Brown of bypass to blue/white of r/s
Green of bypass to Green of r/s (lock)
Blue of bypass to blue of r/s (Unlock)
Violet/white of bypass N/A
Pink/white of bypass to Green of r/s (door trigger input)
Pink of bypass to BLACK/ white of r/s (domelight surpersion output)
Orange of bypass N/A
Red of bypass to constant 12V
Black of bypass to ground
Sylvain you did it!trailblazer r/s no crank - Page 2 -- posted image.
As much as I wanted to test the system after each change, I corrected all of the mistakes that you pointed out and did a reset (mode 7) on the gmdlbp. I programmed the platform and she fired right up.
Thank you so much for taking the time to help me get this thing right, much appreciated!!!
2003 Trailblazer LT
2007 Envoy SLT
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer