dei 555p w use for 03 focus

Home / the12volt's Install Bay / Car Security and Convenience / dei 555p w use for 03 focus (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

zeekftw

Member - Posts: 8

Joined: December 25, 2010

Location: Nebraska, United States

Posted: April 21, 2011 at 5:33 PM / IP Logged

can i use dei 555p-w for 03 focus

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: April 21, 2011 at 10:12 PM / IP Logged

I don't think it will work. The 555P is compatible with the older PATS systems. The 03 Focus has the newer Sentry type transponder.

syl20rochon

Copper - Posts: 298

Joined: October 16, 2009

Location: Ontario, Canada

Posted: April 21, 2011 at 10:34 PM / IP Logged

You'll need the 555UW or the PKFM. You can also use the Idata link ADSTB.

Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 22, 2011 at 5:20 AM / IP Logged

The 555P was garbage.

syl20rochon

Copper - Posts: 298

Joined: October 16, 2009

Location: Ontario, Canada

Posted: April 22, 2011 at 7:56 AM / IP Logged

Not carbage but not the right application for your vehicle.

Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 22, 2011 at 7:59 AM / IP Logged

Again Sy, apologies, we never had that much choice over here, either use a 556 or remove the RFI chip, it didn't matter because we were installing the R/S with a Cat 1 alarm with 2 cuts any way.

I think the cursed unit was the 555F for Ford and supposedly Toyota.

syl20rochon

Copper - Posts: 298

Joined: October 16, 2009

Location: Ontario, Canada

Posted: April 22, 2011 at 8:10 AM / IP Logged

When the open state door trigger came out, my first one came back because the gem was falling asleep, that is why I recommend the diodes. I also think that dei made a module for it, I think that I saw that.

Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

syl20rochon

Copper - Posts: 298

Joined: October 16, 2009

Location: Ontario, Canada

Posted: April 22, 2011 at 8:17 AM / IP Logged

Found the module...the DTIMAZDA is a open state door module interface...look it up

Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 22, 2011 at 8:22 AM / IP Logged

Not that one, that's for Mazdas and late Fords using the open circuit door pins, completely different kettle of fish.

You can also use a step up resister or a relay for the same purpose but frankly the diodes whilst fiddly are much cheaper, especially if like me you buy 200 at a time.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dei 555p w use for 03 focus

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.