530t modules x 2

You two should talk, Cristu now has more recent knowledge than me!

Thanks Howie, you've been so helpful, I've never posted on any of your posts, but I've read hundreds of your comments in the process of researching for installing everything in my car! Do you know if it's possible for me to reset Aux 2 Timed output to 30 seconds without a bitwriter? I believe even when I reset it to default, then back to timed, it keeps the 4 seconds that was programmed before with a bitwriter when Aux 2 was connected to something else. Thanks again

Top of my head, you should be able to manually program it to 20 second intervals. This is where I go off into one of my grumpy old man routines about how much more sophisticated the manual programming was on Clifford G series, but that's history! The other interesting point is that I believe DEI does it's European base, i.e. technical research on European cars now from Romania which is why you are getting product and availability we haven't even seen yet.

thanks for the info, that's so interesting about Romania being the base for DEI research, didn't know that! I agree that the Vipers aren't very intuitive with programming unless you have a bitwriter, I've tried every setting and can't get it to reset to 30 seconds via the valet button, so think I will have to leave it on default validity for now, and hold the button down, for windows up, until I can get hold of a bitwriter from somewhere! on a side note when I vent the windows, they only go down by half an inch, not the two inches it mentions in the manual, should I be worried about that or try adjusting the dip switches again? thanks again, sorry to be a pain with all the questions!

Bring the settings back to default spray the window channels with WD40 or similar.

Switch wires output on channels 1 and 2. Channel 1 for all way up and 2 for vent windows.