the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

06 dodge ram 2500 diesel


Post ReplyPost New Topic
< Prev Topic Next Topic >
pitoaudiovisual 
Copper - Posts: 388
Copper spacespace
Joined: April 25, 2005
Location: Pennsylvania, United States
Posted: May 12, 2011 at 5:53 PM / IP Logged  
I want to do a remote starter in a Dodge Ram 2500 and i was going to install a DB-All for the bypass part and a Prestige ASP620N and i noticed for the paper work for the diesel bulb wire there is nothing and it says i have to use Direct Fax number 1091 which shows another bypass called a 528T and not really sure how it works before i do the install cause this is the first Diesel ive done so if anyone know how to wire this car up with the wait to start and if i really do need the 528T let me know... Thanks in advance
Confidence is the key to any project!!
ac0j 
Copper - Posts: 121
Copper spacespace
Joined: January 27, 2006
Location: United States
Posted: May 13, 2011 at 9:45 PM / IP Logged  

I am not a prestige dealer so I dont know about them, BUT most remote starts have a wait to start wire that would connect to the wait to start light.

OR it might have a wait to start timer in the RS programming.  Set it to 30 or 60 seconds depending on how long the cold diesel takes to get ready to start. Otherwise it is just like any other remote start install.   NOTE use tach mode, because voltage sense mode might cause problems in a diesel install because of the 2 batteries.

i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: May 13, 2011 at 11:11 PM / IP Logged  
Prestige does have a programmable delay.  I think the choices are 10, 15 and 20 seconds. 
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: May 14, 2011 at 5:35 PM / IP Logged  
Yep, no need to connect anything. Simply program diesel delay....
Mike M2
Tech Manager
CS Dealer Services
syl20rochon 
Copper - Posts: 298
Copper spacespace
Joined: October 16, 2009
Location: Ontario, Canada
Posted: May 14, 2011 at 8:06 PM / IP Logged  
Use the diesel timer and use the tach output of the DBALL and you'll be fine.
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer