07 350z viper 5701 manual trans

i am gonna try this configuration to keep the handbrake wire and the clutch wires out of the same relay.  i will use relay 1 to pass the + trigger for relay 2. 

relay1 will be triggered by the handbrake being engaged and the starter being energized.

relay 2 will be triggered from the starter (through relay1) and by -starter from viper.

this will still give me the logic i want (three input AND gate).  the handbrake, +starter, and -starter all being energized for the remote start to operate while still having to manually engage the clutch to crank the car with a key.   

relay 1

85 +starter 12v

86 - handbrake

87 +starter 12v

30 to pin 85 on relay 2

relay 2

85 from pin 30 on relay 1

86 - starter from viper

87 one side of clutch switch

30 other side of clutch switch