300 rattler, how to disable?

Home / the12volt's Install Bay / Car Security and Convenience / 300 rattler, how to disable? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

altapasacal

Member - Posts: 1

Joined: May 20, 2011

Location: Texas, United States

Posted: May 20, 2011 at 7:34 PM / IP Logged

All, I am new to this. I have the 300 Rattler and it was installed some years ago. I have lost the remote to the rattler and the battery had died thus now after getting a jump the alarm sounds. Can you please give me advice on what to do. How do I easily disable because now my ignition or car will not start? is it easy to get another remote or can I disable the alarm? I know where the rattler black box is but I dont know which wires to pull? Or do I need to pull any wires?

altapasacal

kallan90

Member - Posts: 23

Joined: May 16, 2011

Location: Manitoba, Canada

Posted: May 20, 2011 at 8:18 PM / IP Logged

To get your car to start, you will have to reconnect the wires as in the image below.

300 rattler, how to disable? - Last Post -- posted image.

I think you should be able to just disconnect all the connectors to the alarm module(black box) to stop the alarm from going off too.

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: May 20, 2011 at 10:21 PM / IP Logged

Near the brain should be an inline fuse on the red constant power wire. remove the fuse and its disabled and the car will start.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: May 21, 2011 at 12:04 AM / IP Logged

Or just pull the plug on the unit

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

300 rattler, how to disable?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.