Ignition wires 1&2?

Home / the12volt's Install Bay / Car Security and Convenience / Ignition wires 1&2? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

v8pwr

Member - Posts: 26

Joined: April 23, 2003

Location: United States

Posted: April 25, 2003 at 3:52 PM / IP Logged

When installing the starter kill, and if there are more than one ignition wires at the harness (according to the wiring diagram), do I have to connect ignition input from alarm to both of these wires? or do I just connect to either one?

Thanks for your help!

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: April 25, 2003 at 9:31 PM / IP Logged

if you have more then one and you are going to use a relay to disable the starter, treat the wires as one.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Ignition wires 1&2?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.