viper 5701 into a 2010 jeep wrangler

Home / the12volt's Install Bay / Car Security and Convenience / viper 5701 into a 2010 jeep wrangler (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

theiss2200

Member - Posts: 2

Joined: May 25, 2011

Location: New York, United States

Posted: May 25, 2011 at 3:08 PM / IP Logged

I haven't installed a remote start in a long time. I have a customer that wants me to install the Viper 5701 into a 2010 Jeep Wrangler, Stick shift, I was wondering if anyone has done this before or maybe knows where I can find and instalation instructions or diagrams for this vehicle and the remote start? Any sugestions on putting this in?

thanks

Back to Top

zeros

Member - Posts: 9

Joined: April 06, 2006

Location: United States

Posted: May 25, 2011 at 3:49 PM / IP Logged

i just did the same thing... use a CHALL and cth2 interface and it is pretty much plug and play... you shouldnt have any problems.. only have to wire up a few things..

Back to Top

theiss2200

Member - Posts: 2

Joined: May 25, 2011

Location: New York, United States

Posted: May 26, 2011 at 10:18 AM / IP Logged

where can I find the CHALL? Thanks for the info

Back to Top

zeros

Member - Posts: 9

Joined: April 06, 2006

Location: United States

Posted: May 26, 2011 at 12:30 PM / IP Logged

no problem ... most audio places have them.. i got mine at caraudiogiants.com you will need a CHALL and cth2 cable.

Back to Top

kbb2002

Member - Posts: 3

Joined: May 16, 2007

Posted: May 27, 2011 at 3:16 PM / IP Logged

I prefer the DB-ALL from xpresskit. I just installed a 5701 with a DB-ALL on a 2006 Chrysler 300 and it was a breeze. If you go to xpresskit.com it also has a wiring diagram. I also bought the XKLOADER2 so i could flash the DB-ALL with the latest Chrysler firmware.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5701 into a 2010 jeep wrangler

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.