frustrated and confused, viper alarms

Home / the12volt's Install Bay / Car Security and Convenience / frustrated and confused, viper alarms (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

speedaholic

Member - Posts: 4

Joined: July 04, 2011

Location: Florida, United States

Posted: July 04, 2011 at 9:58 PM / IP Logged

I have a couple of issues and I hope I came to the right spot..

I have two viper alarm systems one of them is the 5702v which is in my car and I think the other one is a Viper 5901.

With the remote of the 5702v I programmed it for the truck unfortunately it did not set itself for car 2 so what I have going on

is when I hit the button now both of the vehicles lock and unlock..

I'm trying to figure out how to remove the truck off of it and select car 2 next time to program it...

For some reason on that remote it only shows car 1 and I can't figure out how to select car2 with the 5702v .

With the Viper 5901 remote, when I select car 1 it doesn't do anything except go directly to program...

I'm off frustrated and confused any help please.

awdeclipse

Copper - Posts: 285

Joined: August 05, 2007

Location: Michigan, United States

Posted: July 04, 2011 at 10:05 PM / IP Logged

I would imagine you have to delete the remotes from the Alarm, not the other way around.

Check the manual, should be a method to delete all remotes then you can start over.

speedaholic

Member - Posts: 4

Joined: July 04, 2011

Location: Florida, United States

Posted: July 04, 2011 at 10:07 PM / IP Logged

Loos like what this guy did..

https://www.the12volt.com/installbay/forum_posts.asp~TID~127815~get~last#633814

speedaholic

Member - Posts: 4

Joined: July 04, 2011

Location: Florida, United States

Posted: July 04, 2011 at 10:08 PM / IP Logged

Sorry this link

https://www.the12volt.com/installbay/forum_posts.asp?tid=120123&KW=tedmond

speedaholic

Member - Posts: 4

Joined: July 04, 2011

Location: Florida, United States

Posted: July 04, 2011 at 11:36 PM / IP Logged

Ok got it working and I know how to set car 2 on the 5702v and the 5901 viper remote.. frustrated and confused, viper alarms - Last Post -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

frustrated and confused, viper alarms

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.