viper 160xv shutdown /+ error 6

Home / the12volt's Install Bay / Car Security and Convenience / viper 160xv shutdown /+ error 6 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

t&t tech

Platinum - Posts: 2,610

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: July 15, 2011 at 7:51 PM / IP Logged

Have you tried re-programming the remotes?

commit your way to jehovah and he will act in your behalf. psalms 37:5

houston08

Member - Posts: 11

Joined: July 12, 2011

Posted: July 15, 2011 at 10:15 PM / IP Logged

i have not, i'll try that.

houston08

Member - Posts: 11

Joined: July 12, 2011

Posted: July 16, 2011 at 12:04 AM / IP Logged

No sir, that didn't work either.

t&t tech

Platinum - Posts: 2,610

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: July 16, 2011 at 5:38 AM / IP Logged

So the unit is getting power, ground and ignition? Does it go into valet mode? Is the ribbon plugged in on both sides? If the unit is not going into valet mode, it's probably gone into a coma.

commit your way to jehovah and he will act in your behalf. psalms 37:5

houston08

Member - Posts: 11

Joined: July 12, 2011

Posted: July 16, 2011 at 7:58 AM / IP Logged

The unit is getting power and ground, yes. But nothing for ignition as far as the unit, but the car does start if that's that you mean. All ribbons have been beyond triple checked at this point. The unit will go into Valet mode, so I'm going to diagnose the receiver for the unit, hoping that maybe weather damage was the culprit.

houston08

Member - Posts: 11

Joined: July 12, 2011

Posted: July 16, 2011 at 8:15 AM / IP Logged

So i think it may be the remote or the receiver. I tried changing a setting, to have the parking lights stay constant instead of flash during startup, and my remote wouldn't change anything. Any ideas on how to further test this?

houston08

Member - Posts: 11

Joined: July 12, 2011

Posted: July 16, 2011 at 11:29 AM / IP Logged

i tested the receiver to make sure all the wires were still gettin through. no problem there. so now i'm just completely stumped.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 160xv shutdown /+ error 6

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.