the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

02 dodge durango


Post ReplyPost New Topic
< Prev Topic Next Topic >
ramon2001 
Member - Posts: 44
Member spacespace
Joined: August 30, 2006
Location: United States
Posted: July 20, 2011 at 9:15 PM / IP Logged  
please help. i recently installed an auto guard basic alarm to 02 dodge durango. the alarm goes off 30 seconds after i activate it. i used diodes on door tiggers and 820 ohm resisterr and 330 ohm to lock and unlock. the alarm says that its a door trigger.i disconnect door trigger wires and alarm doesnt go off. i connect it and it goes off thirty seconds after activation. i even put it on 60 seconds door trigger supervision. please help. i dont get it. thank you in advance.
ramon
kreg357 
Platinum - Posts: 7,619
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: July 20, 2011 at 9:23 PM / IP Logged  

DEI Tip 1076?             https://www.the12volt.com/installbay/file.asp?ID=514

Soldering is fun!
ac0j 
Copper - Posts: 121
Copper spacespace
Joined: January 27, 2006
Location: United States
Posted: July 20, 2011 at 10:54 PM / IP Logged  
Is it the factory alarm going off? or the after market?
ramon2001 
Member - Posts: 44
Member spacespace
Joined: August 30, 2006
Location: United States
Posted: July 23, 2011 at 12:22 AM / IP Logged  
the aftermarket alarm goes off.
ramon
ramon2001 
Member - Posts: 44
Member spacespace
Joined: August 30, 2006
Location: United States
Posted: July 23, 2011 at 12:28 AM / IP Logged  
there is a link from dei. do i use two diodes for each door trigger? i kind of dont get it? thanks
ramon
jmsounds 
Copper - Posts: 99
Copper spacespace
Joined: June 28, 2007
Location: Maryland, United States
Posted: July 26, 2011 at 3:52 PM / IP Logged  
yes u do but you have to follow the instruction carefully solder them if you can if not make sure you make good connections

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, September 28, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer