2010 tundra, viper 5301

Home / the12volt's Install Bay / Car Security and Convenience / 2010 tundra, viper 5301 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

kreg357

Platinum - Posts: 7,787

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: September 01, 2011 at 3:38 PM / IP Logged

That harness is on the ignition key cylinder as shown in this install guide : http://www.xpresskit.com/DocumentDownload.aspx?documentid=6237&productid=196&firmwareid=1636

Wire colors should be : ( For orientation, Pin 3 is empty. 7 pin connector )

Pin RX Pin TX

4 Light Green 5 Blue

Soldering is fun!

Back to Top

lmbbuilders

Member - Posts: 6

Joined: August 15, 2011

Location: Louisiana, United States

Posted: September 07, 2011 at 2:12 PM / IP Logged

Kreg...everything went good. Thanks for all the help. The only issue I have so far is..I accidentally pressed the remote start button and didnt know it and when the truck turned off....it left my headlights on. Any way of fixing that issue? Also..when I remote start it..and then drive down the road...my key fob makes some beeping noise...and a green led lights up along with a red led...nothing happens...it justs makes this noise once or twice then I notice a click from the immobilzer bypass click. Is this normal? Thanks, Lance

Back to Top

hackerbeavis

Member - Posts: 1

Joined: February 16, 2011

Location: Illinois, United States

Posted: November 30, 2011 at 9:12 AM / IP Logged

If you set the options on the unit so that it re-locks/re-arms after a remote start shutdown, it should take care of the headlights being left on.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2010 tundra, viper 5301

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.