which bypass module for hummer h3?

Home / the12volt's Install Bay / Car Security and Convenience / which bypass module for hummer h3? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

equate

Copper - Posts: 118

Joined: March 07, 2005

Posted: August 25, 2011 at 3:00 PM / IP Logged

There is Hummer H3 2006. Anyone knows which bypass module is for it?

I check with Xpresskit. It says XK06. But I check with bulldog, it says DB-ALL.

Anyone installed it before? Thanks for sharing..

Back to Top

dasbogie

Silver - Posts: 514

Joined: September 30, 2006

Location: Pennsylvania, United States

Posted: August 25, 2011 at 4:49 PM / IP Logged

We have had some problems using data bypasses in the h3,colorado, canyon platform. We usually use the old 2 relay and resistor method.

Advanced

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: August 25, 2011 at 6:14 PM / IP Logged

The relay and resistor method works well and is the only way to go on the 2008 and up vehicles. On the earlier

vehicles, like your 2006, I have had excellent results with the iDatalink ADS DL flashed with ADS DL GM4 firmware.

The ADS bypass module will also take care of the door locks and factory alarm. If you don't have the USB cable to

flash the module, look at the ADS ALSL GM module. It comes pre-loaded.

As dasbogie also pointed out, the H3 is the same as the Colorado/Canyon. A search on those vehicles will reward you with more info and pictures.

Soldering is fun!

Back to Top

muaiad97

Copper - Posts: 207

Joined: April 08, 2003

Location: Canada

Posted: August 29, 2011 at 3:51 PM / IP Logged

u can use IB-PLJX very easy instalation and works good ihav don to many cobalt and h3 with no starter wire

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

which bypass module for hummer h3?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.